SpotLight on K3 by wb8yqj

From Zerobeat

• Add top side lighting to the K3 and watch some magic courtesy of the plexiglas. It looks great day and night, K3 off or on. The entire area around the main tuning knob glows from reflection. I used a small nightlight and an extension cord. You can see parts of the illumination light in the detail photos, but it is invisible from the operating position. Add some Drake blue lighting gel over the light source and the frame becomes a cool neon blue color.

• Adding some small rubber feet under the front legs really improves the viewing angle. I used double sided foam tape to attach an extra pair of the K3 rear feet to the front bail legs.

Pictured with 1.5 inch aluminum spinner and Drake Blue

• Detail Photo 1

• Detail Photo 2

• Detail Photo 3

Pictured with 1.5 inch aluminum spinner, .5 inch SubRx and RIT knob aluminum spinners, and Drake Blue

• Detail Photo 1

• Detail Photo 2

Shown with expanded S-Meter display

Use your inkJet printer and light paper to expand the S-Meter scale and then update the value of the K3 CONFIG S-Meter RANGE to use more of the bars.

Use your inkJet printer and some 3M transparency film to expand the S-Meter scale and then update the value of the K3 CONFIG S-Meter RANGE to use more of the bars.